Excellent DIY mBot V1.1 Educational Robot Kit Smart Car for Kids, Robot Toy designed for education(2.4G Version) Dreamyth (A)
Huge Savings Item! Save 19% on the Excellent DIY mBot V1.1 Educational Robot Kit Smart Car for Kids, Robot Toy designed for education(2.4G Version) Dreamyth (A) by Dreamyth at Chasing My Extraordinary. MPN: Dreamyth. Hurry! Limited time offer. Offer valid only while supplies last. ღSpecifications: ღ ღCPU: High performance and low power 8-bit micro controller with 6-channel PWM channel, 8-channel 10-bitADC, a programmable
ღCPU: High performance and low power 8-bit micro controller with 6-channel PWM channel, 8-channel 10-bitADC, a programmable serial USART
ღMotor Driver IC Chip: TB45OA2 / 6612FNG makes the motor driving more easier, saves IO port, while in the hardware
ღdesign, uses the S9013 transistor to save IO, together with the driver chip, only needs two IO ports
ღto control the motor speed and direction
ღRGB Colorful WS2812B: 5050 colorful RGB packaged, four PIN controlled, resource cost-saving, easily & quickly
ღperformance controlled. we can freely control 2 RGB colors.
ღInfrared Receiver and Infrared Transmitter: The board is integrated infrared receiver and infrared emission, which can not only decode the
ღremote control development, but also convert the board to a converter ,and changes other control
ღsignals into infrared signals, is emitted by the infrared, thus controlling all the home appliances;
ღSerial module socket: On the development board, there integrates a Tx, Rx interface to facilitate our expansion modules,
ღsuch as Bluetooth, 2.4G module module, WIFI module and so on;
ღBuzzer:Board is integrated with buzzer, users can freely enjoy buzzer, such as music and alarm functions.
ღAA battery box: can installed 4 dry batteries for car power supply(not inclded)
ღWorking voltage: DC 3.7-6V
ღWorking temperature: normal temperature
ღSize: 150 x 172 x 90mm/5.9 x 6.7 x 3.5 inch
ღPackage Content:(with retail package)
ღ1 x Smart Car
ღ1 x remote control
Features & Highlights
- USB interface: Users can program by themselves Motor interface: Dual motor interface control Ultrasonic interface: ultrasonic distance measurement and small obstacle experiment Infrared tracking interface: Line experiment
- YKS mainly has the following functions: Standby mode, Auto control mode, manual control mode, tracking mode, Obstacle avoidance mode, music Play mode, RGB lights control Standby mode: when is Power on, it defaults into standby mode, that is, without any other mode, it waits for the remote control instruction.
- Auto control mode: this mode is to drive forward and backward automatically , in the process, you can change direction, and then continue to the original forward or backward. Manual control mode: short press to a single step, and long press to go forward or go backward, so is the left & right direction.
- Tracking mode: In accordance with the set route (black line) walking. Obstacle avoidance mode: the default safe distance for car is 20CM, when the car reach the safe distance, it will go back or turn another direction.
- Music Play mode: buzzer plays music "Gourd Kids" and accompanied by colorful flashing. RGB lights control: loop control the lights of RGB colors for car, and can adjust its brightness.